Tool Room Size Lathe
OEM: Sharp Industries, Inc. (Made in Taiwan)
Model: 1340F / Serial No.: 23992
Date of Manufacture: 2002
Electrics: 220-440 Volt / 3 Phase / 60 Cycle / FLA: 8.6-4.3
Main Motor: 3 HP (confirmation required)
Features and Specifications:
…Geared Head Stock
…Spindle Specs:
……Speeds (16): 45 - 1800 RPM
……Type: D1-4 Camlock
……Bore Taper: MT#5
……Thru Hole: 1-1/2"
…Swings:
……Over Bed: 13″
……Over Gap: 18-1/2"
…Distance Between Centers: 40″
…Tailstock Specs:
……Tailstock Taper: MT #3
……Tailstock Quill Travel: 4-1/2"
…Threading Specs:
……Metric (22): 0.45 – 7.5 MM
……Inch (40): 4 – 112 TPI
……Leadscrew Pitch / Diameter: 8 TPI / 7/8"
…Feed Specs (Inch):
……Longitudinal Feeds (40): 0.0012 – 0.0294 Inch / Rev.
…Newall Topaz 2-Axis DRO
…Work Light
…Foot Treadle
…Collet Closer
…2-Way Tool Holder
…No Tooling or Manuals
Overall Machine Dimensions (approx.): 72″ x 36″ x 64″
Machine Weight (approx.): 1,550 lbs.
Specifications taken from 1st-hand inspection and OEM specification research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes:
I purchased this machine off the shop floor of a good account in Portland; it was not under power. I have not put it under power. I was told that it had been used within the last year and was operable. No longer was required for shop process. This machine comes with no tooling other than listed in ad; no operations manuals.
One of the operations buttons on the front is missing. The writing for some spindle speeds and threading speeds/feeds are worn off. I obtained information through researching this model on the internet. Information is easily attainable. Has some light surface rust and some dirt; requires cleaning.
Comes with 2-Axis DRO, tool holder, collet closer, work light.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Salem, OR
Equipment is presently NOT under power.
Seller will load onto Buyer’s transportation.
Delivery option available w/ fee dependent on time and distance.
Buyer responsible for freight logistics and expenses.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
