66-Ton Ironworker
Manufacturer: Marvel Manufacturing Company (Wisconsin)
Model: IW66DX Spartan
Serial No.: IW66DX-XXX (available for serious inquiry)
Age: Circa 2012
Electrics: 460 Volt / 3 Phase / 60 Cycle / FLA: 10.8
Main Motor Power: 7.5 HP
Features and Specifications:
...Dual Cylinder, Completely Integrated
...Throat: 20"
...Work Stations: 5 (Punch, Notching, Bar/Flat Bar/Angle Shear)
...Two (2) Full Control Foot Pedals
...Tooling: Five (5) Sets Punches and Dies:
......Punches: 9/16"; 11/16"; 13/16"; 15/16"; 1-1/16"
......Dies: 19/32"; 23/32"; 27/32"; 31/32"; 1-3/32"
...Work Light
...Scrap Boxes at Punch/ Notching Stations
...Adjustable Stroke Depth at Punch
...2-Piece Gauging Table at Punch
...Keyed Punch Holder for Shaped Tooling
...Adjustable Electric Back Gauge (36")
...Punch Stroke Length: 3-15/16"
...Cycles Per Minute in 3/4" Material: 30
...Punching Station Work Height: 39-3/4"
...Flat Bar Shear:
......Capacity: 14" in 9/16"
......Max. Width, Thickness: 10" in 3/4"
......Lower Blade: Four (4) Usable Edges
......Upper Blade: Two (2) Usable Edges
......Support Table Guides
......Adjustable Hold Downs
...Angle Shearing:
......5" x 5" x 1/2" at 90 Degrees
......2.5" x 2.5" x 5/16" at 45 Degrees
......Shear Blades: Four (4) Usable Edges
......Angle Shear Height: 43-3/4"
...Bar Shearing:
......Round Capacity: 1-1/2"
......Square Capacity: 1.5" x 1.5"
......Five (5) Cavity Round and Square Bar Shear Sizes
.........Round: 1/2"; 1"; 1-1/2"
.........Square: 3/4"; 1-1/2"
...Channel Shear Max: 5"
...I-Beam Shear Max: 5"
...Bar Shear Work Height: 48"
...Notching Capacity:
......Rectangular: 2" x 3.5" in 5/16" Material
......Electrical Interlock Safety Guard
......Gauge Table w/ Stops for Positioning
......Notcher Work Height: 36-1/4"
...Tooling: Punch, Die Set (see pics)
Machine Dimensions (approximate): 84″ x 48″ x 72″ Tall
Machine Weight (approximate): 4,900 lbs.
Functionality Notes: EQUIPMENT IS LIKE NEW! This machine is 100% operational, functional, and in EXCELLENT condition; original owner. Owner maintains this machine has approximately 80 hours on it since new in 2011/2012. This machine is like new. This machine is under power and available for demonstration.
EQUIPMENT LOCATION: Portland, OR Metro Area
Presently under power; available for inspection.
Buyer responsible for freight logistics and expenses.
Seller will load onto Buyer’s transportation.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase.
