Bridgeport Vertical Milling Machine
Have one to sell?
ConditionUsed
1 available
Manual Knee Mill
OEM: Bridgeport Machines, Inc.
Model No.: 1HP
Serial No.: 161850
Year: 1974
Head Serial No.: J167847
Electrics: 230-460 Volt, 3 Phase, 60 Cycle, 1.65-3.3 Amps
Main Spindle: 1 HP, 1730 RPM
Features and Specifications:
...Controls: 2-Axis Anilam Microwizard DRO
…Table Size: 49" x 9″
…Workpiece Load: 750 lbs.
…Travels (approx.):
…..X-Axis: 36”
…..Y-Axis: 12”
…..Z-Axis (Knee): 16”
…..Quill (Spindle): 5”
…..Ram: 12”
…(8) Pulley-Speed Drive:
…..(4) Low Speed: 80 - 325 RPM
…..(4) High Speed: 660 - 2720 RPM
…Quill Feeds (IPR): .0015, .003, .006
...X-Axis Power Feed
…Spindle Direction Switch
…Spindle Taper: R8
…Knuckle Joint for Head Tilt F-B & L-R
…1-Shot Lube
...Work Lamp
…Tooling (see pics):
......Collets (9)
......Drill Chuck
......Vise (Need to Confirm)
Dimensions (approx.): 71" x 60" x 82”
Weight (approx.): 2,000 - 2,500 lbs.
Approximate specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
Mill is in operational condition; currently not under power. Came from a clean, well-kept model shop from a large manufacturing company in Portland, OR. Purchased by MD Equipment Services (MDES); currently in MDES warehouse in Corvallis, OR.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Corvallis, OR
Equipment is not under power; available for inspection.
Seller agrees to load equipment onto Buyer's transportation.
Buyer responsible for freight logistics and expenses.
MDES delivery services available; dependent on time, distance, fuel.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
Manual Knee Mill
OEM: Bridgeport Machines, Inc.
Model No.: 1HP
Serial No.: 161850
Year: 1974
Head Serial No.: J167847
Electrics: 230-460 Volt, 3 Phase, 60 Cycle, 1.65-3.3 Amps
Main Spindle: 1 HP, 1730 RPM
Features and Specifications:
...Controls: 2-Axis Anilam Microwizard DRO
…Table Size: 49" x 9″
…Workpiece Load: 750 lbs.
…Travels (approx.):
…..X-Axis: 36”
…..Y-Axis: 12”
…..Z-Axis (Knee): 16”
…..Quill (Spindle): 5”
…..Ram: 12”
…(8) Pulley-Speed Drive:
…..(4) Low Speed: 80 - 325 RPM
…..(4) High Speed: 660 - 2720 RPM
…Quill Feeds (IPR): .0015, .003, .006
...X-Axis Power Feed
…Spindle Direction Switch
…Spindle Taper: R8
…Knuckle Joint for Head Tilt F-B & L-R
…1-Shot Lube
...Work Lamp
…Tooling (see pics):
......Collets (9)
......Drill Chuck
......Vise (Need to Confirm)
Dimensions (approx.): 71" x 60" x 82”
Weight (approx.): 2,000 - 2,500 lbs.
Approximate specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
Mill is in operational condition; currently not under power. Came from a clean, well-kept model shop from a large manufacturing company in Portland, OR. Purchased by MD Equipment Services (MDES); currently in MDES warehouse in Corvallis, OR.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Corvallis, OR
Equipment is not under power; available for inspection.
Seller agrees to load equipment onto Buyer's transportation.
Buyer responsible for freight logistics and expenses.
MDES delivery services available; dependent on time, distance, fuel.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
We use cookies to improve your experience. Privacy Policy.