Bridgeport Manual Knee Mill
Have one to sell?
ConditionUsed
1 available
Variable Speed Knee Mill
OEM: Bridgeport
Model No.: Series 1
DOM: 1985
Head Serial No.: 2J-1255 18-2
Electrics: 230-460 Volt, 3 Phase, 50-60 Cycle, 5.6-2.8 Amps
Main Spindle: 2 HP, 1415-1710 RPM
Features and Specifications:
...Controls: Mitutoyo DRO
...Table Size: 48″ x 9″
...Travels (approx.):
......X-Axis: 36”
......Y-Axis: 12”
......Z-Axis: 16”
......Quill: 5”
......Ram: 14”
...Variable-Speed Drive:
......Low Speed: 60 – 500 RPM
......High Speed: 500 – 4200 RPM
...Quill Feeds (IPR): .0015, .003, .006
...Workpiece Load: 750 lbs.
...X-Axis Power Feed
...Spindle Direction Switch
...Spindle Taper: R8
...Knuckle Joint for Head Tilt F-B & L-R
...1-Shot Lube
Overall Equipment Dimensions (measured): 60” x 60” x 87”
Overall Equipment Weight (approx.): 2,500 - 3,000 lbs.
Advertised specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
This machine is 100% functional; under power, available for inspection. X-Axis power feed may or may not work. Operator says he has never used it but thinks it may be broken. Owner is retiring after 30 years; some equipment going to home shop, remainder being liquidated.
Has run a mix of small UHMW, Aluminum, and Stainless Steel parts. Likewise, shop is mix of CNC and manual equipment.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Vancouver, WA Metro Area
Equipment is available for inspection; under power.
Seller will load onto Buyer’s transportation.
Buyer responsible for freight logistics and expenses.
MDES can provide delivery services if needed.
Cost dependent on time, fuel, and distance.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
Variable Speed Knee Mill
OEM: Bridgeport
Model No.: Series 1
DOM: 1985
Head Serial No.: 2J-1255 18-2
Electrics: 230-460 Volt, 3 Phase, 50-60 Cycle, 5.6-2.8 Amps
Main Spindle: 2 HP, 1415-1710 RPM
Features and Specifications:
...Controls: Mitutoyo DRO
...Table Size: 48″ x 9″
...Travels (approx.):
......X-Axis: 36”
......Y-Axis: 12”
......Z-Axis: 16”
......Quill: 5”
......Ram: 14”
...Variable-Speed Drive:
......Low Speed: 60 – 500 RPM
......High Speed: 500 – 4200 RPM
...Quill Feeds (IPR): .0015, .003, .006
...Workpiece Load: 750 lbs.
...X-Axis Power Feed
...Spindle Direction Switch
...Spindle Taper: R8
...Knuckle Joint for Head Tilt F-B & L-R
...1-Shot Lube
Overall Equipment Dimensions (measured): 60” x 60” x 87”
Overall Equipment Weight (approx.): 2,500 - 3,000 lbs.
Advertised specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
This machine is 100% functional; under power, available for inspection. X-Axis power feed may or may not work. Operator says he has never used it but thinks it may be broken. Owner is retiring after 30 years; some equipment going to home shop, remainder being liquidated.
Has run a mix of small UHMW, Aluminum, and Stainless Steel parts. Likewise, shop is mix of CNC and manual equipment.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Vancouver, WA Metro Area
Equipment is available for inspection; under power.
Seller will load onto Buyer’s transportation.
Buyer responsible for freight logistics and expenses.
MDES can provide delivery services if needed.
Cost dependent on time, fuel, and distance.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
We use cookies to improve your experience. Privacy Policy.