Hardinge 2nd-Operation Lathe
Have one to sell?
ConditionUsed
1 available
Manual 2nd-Operation Turret Lathe
OEM: Hardinge Brothers, Inc. (Elmira, NY)
Model: DSM-59
Date of Manufacture (estimated): 1960 – Mid-1970’s
Electrics: 208-220 Volt, 3 Phase, 60 Cycle
Main Motor: 1 HP Dual-Range
Features and Specifications
...Swing Over Bed: 9”
...Length of Bed: 36”
...Spindle Specifications:
......Type: Standard Hardinge 5C
......Capacity (Round 5C Collet): 1-1/16”
......Capacity (Step Chuck): Up to 6”
......Speeds: 230 – 3,500 RPM (variable)
...Dovetail Bed, Hardened & Prevision-Ground
...Rigid Spindle Design
...6-Position Bed Turret
...Heavy Cast Cabinet Pedestal
...Lever Collet Closer
...Coolant Capable w/ Gusher Pump
Mahine Dimensions (approx.): 72” x 36” x 60”
Weight (estimated): 1,150 lbs.
Approximate specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
This machine is 100% functional; under power, available for inspection. Owner is retiring after 30 years; some equipment going to home shop, remainder being liquidated. Has run a mix of small UHMW, Aluminum, and Stainless-Steel parts.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Vancouver, WA Metro Area
Equipment is under power; available for inspection.
Seller agrees to load equipment onto Buyer's transportation.
Buyer responsible for freight logistics and expenses.
MD Equipment Services can provide shipping services.
Fee dependent on fuel, time, and distance.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
Manual 2nd-Operation Turret Lathe
OEM: Hardinge Brothers, Inc. (Elmira, NY)
Model: DSM-59
Date of Manufacture (estimated): 1960 – Mid-1970’s
Electrics: 208-220 Volt, 3 Phase, 60 Cycle
Main Motor: 1 HP Dual-Range
Features and Specifications
...Swing Over Bed: 9”
...Length of Bed: 36”
...Spindle Specifications:
......Type: Standard Hardinge 5C
......Capacity (Round 5C Collet): 1-1/16”
......Capacity (Step Chuck): Up to 6”
......Speeds: 230 – 3,500 RPM (variable)
...Dovetail Bed, Hardened & Prevision-Ground
...Rigid Spindle Design
...6-Position Bed Turret
...Heavy Cast Cabinet Pedestal
...Lever Collet Closer
...Coolant Capable w/ Gusher Pump
Mahine Dimensions (approx.): 72” x 36” x 60”
Weight (estimated): 1,150 lbs.
Approximate specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
Functionality Notes & History:
This machine is 100% functional; under power, available for inspection. Owner is retiring after 30 years; some equipment going to home shop, remainder being liquidated. Has run a mix of small UHMW, Aluminum, and Stainless-Steel parts.
CALL FOR DETAILS, SCHEDULE INSPECTION
WE ARE OPEN TO OFFERS
EQUIPMENT LOCATION: Vancouver, WA Metro Area
Equipment is under power; available for inspection.
Seller agrees to load equipment onto Buyer's transportation.
Buyer responsible for freight logistics and expenses.
MD Equipment Services can provide shipping services.
Fee dependent on fuel, time, and distance.
Contact MD Equipment Services LLC to schedule inspection or arrange purchase details.
We use cookies to improve your experience. Privacy Policy.